HPM RC Power Boats

There are no items in your cart.


Tiger King S-29 EVO Engine -NEW

Tiger King S-29 EVO Engine -NEW Image
Detail Image
Detail Image
Detail Image
Detail Image

One of the best quality marine engines you will see on the market.
On the water these motors achieve well over 20,000 rpm with tons of torque to turn larger props.
Engine comes with with factory installed 1.6mm Stroker full circle crankshaft. Complete with strong steel conrod, slotted at each end for good lubrication at high rpm.
The cylinder block has full watercooling around the cylinder and exhaust port.
The TK engine flywheel is only 2'' in diameter and very light and balanced.
Solid cast aluminium crankcase with 4 bearings installed.
The piston crown is ceramic coated and has a separate removable head insert with shims to lower or raise the squish.
TK custom source coil fitted.The TK coil is much longer then zenoah or other clone type coils.
Meehanite steel separate liner with CNC ports These are not the thin liners you see in other engines that will warp in high speeds.
Complete with Walbro 1048 big bore carburettor and an aluminium insulator block.
Also comes with an EZY Start system to make starting simple.
Standard zenoah type collet and mounts and exhaust flanges fit this engine so bolts right in as a Zenoah replacement.
EZY Start Pull starter and mounting screws
Coil and mount
Spark plug
Washers and gaskets
4 bearings Crankcase
Ignition Coil
EZY Start Recoil Starter
Walbro WT 1048

Ignition: CDI-Type Magnetic
Displacement: 28.6cc
Water Cooled: Yes
Bore: 35mm
Stroke: 29.7mm
RPM: More than 20,000 rpm.

Your Price:NZ$539.00
Weight:2.000 kg